Skip to main content

fifine TK1 Microphone Wireless Receiver Controls & Connection

Written by Lola J. Strain

Receiver Controls

How do I adjust the noise reduction level using the receiver?

Short-press the Noise Reduction button on the receiver to switch between the three available noise reduction levels for the connected transmitter (TX).

How do I re-pair the microphone with the receiver?

Press and hold the Noise Reduction button on the receiver for 5 seconds to enter pairing mode. At the same time, press and hold the 4-in-1 control knob on the microphone for 5 seconds.

When the receiver's indicator stays green, the microphone is connected via wireless mode.

Dual Microphone Connection

How do I connect two microphones to one receiver?

Use the wireless receiver to connect both microphones. Follow the pairing procedure for each microphone to establish the wireless connections.

Once both microphones are successfully connected, the TX1 and TX2 indicators on the receiver will remain solid green.

How do I know if both microphones are successfully connected?

Check the TX1 and TX2 indicators on the receiver:

  • Solid green: The corresponding microphone is successfully connected.

  • Flashing green: The corresponding microphone is connecting or the connection has not yet been established successfully.

When both TX1 and TX2 indicators remain solid green, both microphones are successfully connected to the receiver.

Did this answer your question?