Install fifine TK1 microphone
How do I install the microphone?
Screw the extensible tube clockwise into the base stand until it’s firmly connected.
Screw the fifine TK1 microphone clockwise into the base stand.
Adjust the stand height: Turn the twist clutch counterclockwise to loosen it, then clockwise to tighten the stand. Make sure the twist clutch is securely tightened before using the mic.
Start speaking to the mic and recording.
Tips: Speak into the fifine TK1 microphone from 2-6 inches away, and adjust the microphone input gain to your desired level.
How do I attach the TK1 mic to the boom arm?
To attach the fifine TK1 mic to a boom arm, you can screw the microphone clockwise onto the boom arm until it’s firmly connected.
Note: The box of fifine TK1 microphone does not include a boom arm.
Connect fifine TK1 microphone: USB, XLR, Receiver
USB Connection
Fully insert the included USB cable into the USB-C port on the bottom of the TK1 microphone, then connect the other end to a computer or mobile device.
XLR Connection
Fully insert the female end of the XLR cable(not included), with the right-angle connector, into the XLR port on the bottom of the microphone. Then connect the male end to a sound card, mixer, or audio interface. No preamp or phantom power is required.
Wireless Connection(Receiver)
Turn on the microphone. Long-press the noise reduction mode button on the USB-C Wireless Dongle. A steady green light on TX1 indicates a successful connection; then plug the USB-C Wireless Dongle into your computer or mobile phone.
Set up the fifine TK1 microphone on a computer
Hook up the mic to the computer. When the mute button indicates green, the mic is on. The computer will automatically install the driver for the mic. There may be no pop-up message reminding this process though.
Windows:
Input settings
Right-click the speaker icon at the bottom right of the screen. Click “Open sound settings".
Click the Sound Control Panel.
Click the Recording tab, and choose “fifine TK1” as the default device. When you speak into the mic, the volume meter will turn green and bounce. If it remains unchanged, please reset the computer and re-plug the mic into the available USB ports of the computer.
Adjust input volume. Turn up or down the mic volume by adjusting the 4-in-1 knob on the mic.
Output setting:
Output the audio from the mic
Plug the headphones into the 3.5mm jack at the bottom of the mic to monitor your voice in real time. Click the Playback tab in the Sound Panel, and select “fifine TK1” as the default output device. You can monitor your voice mixed with the computer audio.
Click the Speaker(fifine TK1) - Properties - Levels, and drag the progress bar to adjust output volume. You can also adjust the monitoring volume by the 4-in-1 knob on the mic.
Output the audio from the computer
The fifine TK1 microphone will become the default output device automatically when it’s plugged into the computer. If you want to listen to the sound from the built-in speaker of the computer directly, please click the “Playback” tab in the Sound panel and choose “Realtek High Definition Audio” as the default output device.
Click the speaker that is being used - Properties - Levels, drag the progress bar to adjust volume of output.
macOS:
Input setting:
Go to System Preferences.
Click Sound to display the Sound preference panel.
Click the Input tab and make sure that “fifine TK1” is selected as the default input device. Turn up or down the mic volume by adjusting the 4-in-1 knob on the mic.
Output setting:
Output the audio from the mic
Plug the headphones into the 3.5mm jack at the bottom of the mic to monitor your voice in real time. Click the Output tab and choose “fifine TK1”. You can monitor your voice mixed with the sound from the Mac. Drag the progress bar to adjust the output volume. You can also turn up or down the monitoring volume with the 4-in-1 knob on the mic.
Output the audio from the Mac
The fifine TK1 mic will become the default output device automatically when it’s plugged into the computer. If you want to listen to the sound from the built-in speaker of the Mac directly, please choose “Internal Speakers” as the output device. Then adjust the output volume. Other devices, like headphones, work the same.
Connection Troubleshooting
Why is my TK1 not recognized by my computer?
First, check whether the microphone is powered on and whether its battery is low (indicated by a flashing red light on the charging base). When powered on normally, the blue indicator light on the microphone’s LED ring flashes.
To re-pair the microphone, press and hold the encoder knob for 5 seconds while simultaneously pressing and holding the Noise Reduction button on the receiver for 5 seconds.
The receiver’s green indicator light and the microphone’s blue indicator light will flash rapidly, indicating that the devices have entered pairing mode.
If the computer prompts that it’s unable to identify this USB device, please restart the computer and replug the mic into another USB port.
Why is there no sound after the TK1 mic is recognized?
If the TK1 mic is recognized but no sound is coming out, please check whether System Sound is muted or whether you have turned the knob on the mic to minimum. Make sure the Dynamic RGB Panel isn’t red (so the microphone is active), and other microphone input devices should be disabled.
Why do I hear the echo sound when I record with the TK1?
Please uncheck the box “Listen to the device” when you are using any recording software (such as Audacity) or chatting software, otherwise you would hear double audio just like echo.
Click the “Recording” tab, then click “fifine TK1” - Properties - Listen - uncheck the box “Listen to this device” - Apply.
