Install
How to install the fifine AMX3 microphone?
Screw the Extendable Pole clockwise into the base stand until it is firmly connected.
Screw the fifine AMX3 microphone clockwise into the base stand.
Turn the twist clutch on the stand counterclockwise to loosen it and adjust the mic position, then turn it clockwise to tighten the stand. Make sure the twist clutch is securely tightened before using the microphone.
Always keep the top of the microphone facing the audio source. It is recommended to speak into the microphone from a distance of 2-6 inches, and adjust the microphone input gain to your desired level.
Can I install the fifine AMX3 mic on another boom arm?
To install the fifine AMX3 mic on a boom arm, you can screw the microphone clockwise onto the boom arm until it is firmly connected.
Note: fifine AMX3 microphone is paired with a desktop stand arm. The boom arm is not included in the box.
Connect
How to connect fifine AMX3 microphone to your device?
USB Mode
Fully insert the included USB cable into the USB-C port on the bottom of the AMX3 microphone, then connect the other end to a computer or PS4/5.
XLR Mode
Fully insert the female end of the XLR cable (Not included, you can purchase on fifine store.), into the XLR port on the bottom of the microphone. Then connect the male end to a sound card, mixer, or audio interface.
Is 48V phantom power needed for XLR mode?
No, the fifine AMX3 microphone is a dynamic microphone featuring a true balanced 3-pin XLR output; you can connect it directly to a sound card or mixing console.
Setup(On Computer)
Windows
Input settings
Right-click the speaker icon at the bottom right of the screen. Click “Open sound settings".
Click the Sound Control Panel.
Click the Recording tab, and choose “fifine AMX3” as the default device. When you speak into the mic, the volume meter will turn green and bounce. If it remains unchanged, please reset the computer and re-plug the mic into an available USB port on the computer.
Output setting:
Output the audio from the mic
Plug the headphones into the 3.5mm jack at the bottom of the mic to monitor your voice in real time. Click the Playback tab in the Sound Panel, and select “fifine AMX3” as the default output device. You can monitor your voice mixed with the computer audio.
Click the Speaker(fifine TK1) > Properties > Levels, and drag the progress bar to adjust the output volume.
Output the audio from the computer
The fifine AMX3 microphone will become the default output device automatically when it’s plugged into the computer. If you want to listen to the sound from the built-in speaker of the computer directly, please click the “Playback” tab from the Sound panel and choose “Realtek High Definition Audio” as the default output device.
Click the speaker that is being used > Properties > Levels, drag the progress bar to adjust volume of output.
macOS
Input setting:
Go to System Preferences.
Click Sound to display the Sound preference panel.
Click the Input tab and make sure that “fifine AMX3” is selected as the default input device.
Output setting:
Output the audio from the mic
Plug the headphones into the 3.5mm jack at the bottom of the mic to monitor your voice in real time. Click the Output tab and choose “fifine AMX3”. You can monitor your voice mixed with the sound from the Mac. Drag the progress bar to adjust output volume.
Output the audio from the Mac
The fifine AMX3 mic will become the default output device automatically when it’s plugged into the computer. If you want to listen to the sound from the built-in speaker of the Mac directly, please choose “Internal Speakers” as the output device. Then adjust the output volume. Other devices, like headphones, work the same.
Connection Troubleshooting
Why is my AMX3 microphone not recognized by my computer?
Ensure the microphone is powered on and the indicator light is functioning correctly. Check that the cable is securely connected.
If using a USB connection, try connecting to a different USB port on your computer and verify that the microphone is selected as the input device. If using an XLR connection, ensure the microphone is properly connected to the audio interface and check that the computer recognizes the interface.
If the microphone is still not recognized, try using a different USB or XLR cable to rule out cable issues.
Why is there no sound, or is the sound slight after the connection?
Ensure the microphone is not muted and that the volume knob has not been turned all the way down.
Also, verify that the "fifine AMX3" microphone is selected as the input/output device in your system or software settings. Increase the microphone volume/gain and test it.
Why do I hear echo or noise during recording with the AMX3 mic?
Try using a different compatible USB or XLR cable and a different USB port on your computer, ensuring all connections are secure. If using XLR mode, lower the audio interface's input gain and adjust the distance between the microphone and the sound source to prevent distortion.
Try using a different power outlet or disconnecting other unnecessary external devices to check for power-related interference. Also, keep the microphone away from devices that may cause electromagnetic interference, such as monitors, computer power adapters, mobile phones, and routers.
If the noise persists:
Test the microphone by connecting it to a different device. If the issue disappears with the other device, the problem likely lies with the original device, cable, power source, or audio interface; if the issue remains, please contact customer support.
